copper busbar machineshydraulic busbar cutting machine

Selection guide for standard copper bars

1. purpose

Standardize the size selection of copper bars used in switchgear cabinets, that is, select the appropriate cross-sectional specifications in the design of copper bars to ensure the rated current capacity of copper bars in the corresponding use environment.

 

2. Scope of application

Copper and copper alloy busbars for all electricians.

 

3. Selection guide for copper bars in low-voltage switchgear

3.1 Normal use conditions of copper bars in low-voltage switchgear cabinets

Copper bar material: TMY and THMY in accordance with GB/T5585.1-2005 standard;

Conditions of use: ambient temperature 35 ℃, allow temperature rise 70K;

Altitude: <1000m;

Rated working frequency: 50/60Hz.

If the conditions of use are inconsistent with the above, according to the specific conditions of use of copper bars, the current carrying capacity of the copper bars shall be re-checked according to Article 4 of this guide.

 

3.2 System level main bus selection

Under normal use conditions, the technical support engineer selects or modifies the specifications of the horizontal main bus according to the rated current of the low-voltage system according to Table 1. If the design institute does not agree to the modification, the technical support engineer must work with the mechanical design engineer to confirm the specification selection of the horizontal main bus.

Table 1: Rated current-carrying table of horizontal bare copper busbars (copper bars are placed vertically, single-split a=110, double-splice a=110, triple-splice a=130)

Rated current（A）	Horizontal busbar section specifications (thickness × width)mm
	IP30/IP40	IP5X
hydraulic copper bar cutter.0000pt solid windowtext;"> 6300	3-10×160	-
5000	3-10×160	-
4000	3-10×100	-
3200	2-10×100	3-10×120
2500	2-10×80	2-10×120
2000	10×100	2-10×100
1600	10×80	10×120
1250	10×60	10×100
1000	10×50	10×80
800	10×40	10×50
630	10×30	10×40